Product Introduction
ES14B Constant speed DRO is specially designed to provide precision constant speed control for Lathe application, it is configured according to standard CS lathe hardware as it leaves the factory.
Major Function Keys & Buttons
ES14B CS provides an 0 - 10V output to the spindle inverter to allow the direct control of spindle rotational speed, by adjusting the speed button, operator can manually adjust the spindle rotation speed to achieve machining surface finish.
ES14B CS provides the axis summing function for the Z and Z1 axis, operator can swap between the summed display or individual axis display by just a simple single button key press.
Technical Specification
| Model Number | ES14B CS |
| Axis number | Four Axis |
| Axis Display | 1μm, 5μm |
| Signal Input | A / B quadrature signal |
| Power Supply | 110 Voltage - 220 Voltage |
| Weight (kg) | 2.5 |
| Maximum input | 2 MB Hz |
| Operating temperature | 0℃ - 45℃ |
| Storage temperature | -40℃ - 55℃ |
| Relative humidity | ≤ 95% |
| Inputs | 2 or 3 linear encoders |
| EMC Standard | IEC61000-4-2 / GB / T 17799-2 IEC61000-4-4 / GB / T 17799-4 IEC61000-4-5 / GB / T 17799-5 |
EMC Testing equipment
To Make sure all Easson DRO products can be pass the standard EMC standard specification, we have a complete set of EMC test esd immunity tester.
Aging Test
Aging test can verify products of the process, design, material and other aspects are defective or not. We can using this testing promptly revises the product design to improve product quality and service life.
Digital Readout System
Basic parameter in the ES-14B is included as below:
| Centering (1/2) |
| Radius / Diameter for each axis |
| Metric / inches Display (mm / Inch) |
| Absolute / incremental (ABS / INC) |
| Power off Memory (30 subdatums) |
| 199 subdatum |
| Reference Memory (REF) |
Connector interface
| PIN | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
| TTL Signal | --- | 0V | --- | GND | --- | A | 5V | B | R |
| Cable | --- | Orange | --- | Ground | --- | Yellow | | | |
Product Tags:
|
|
Easson ES-14B Constant Speed Lathe 3 Axis Digital Readout System Images
|
